Shopping Cart (0)
Close
Original price was: ₹49,915.₹47,419Current price is: ₹47,419.
In stock
In stock
MADE FOR TOMS
Equipped with our newly designed Super-cardioid capsule and dual-bias circuitry, Tom Mic captures pure, high-definition rack and floor tom sonics with maximum impact and tone while minimizing cymbal bleed.
Capture every nuance of your drum performances with exceptional clarity using the Lauten Audio Tom Mic LS-508, designed to handle sound pressure levels exceeding 135 dB without distortion. Its large 32 mm side-address condenser capsule and super-cardioid polar pattern ensure focused, detailed recordings even in the most dynamic environments. Discover how this microphone can elevate your studio sound to professional standards.
Super-cardioid large diaphragm condenser capsule focuses on the source, the drum.
Circuit designed for high-dynamic range and an output level that melds well with preamps.
Body designed to allow proper airflow but also reduce frequencies captured by the rear node.
Each Tom Mic has a solid brass headframe and mildew-resistant dust filter to protect against stick hits, dust, and debris.
Our bleed-blocking head design and dual-bias circuitry work together to provide Tom Mic with up to 28dB of off-axis rejection. This means crisp, clear tom sounds with far less cymbal bleed than a traditional dynamic or condenser microphone.
Pro sound and isolation straight into your interface.
The power of a condenser with better rejection than a dynamic.
Studio sound and isolation, built for the rigors of touring.
Tom Mic’s filters impact the overall performance of the microphone and play a critical role in its sonic versatility.
| Type | Side-address pressure gradient FET condenser  |
|---|---|
| CAPSULE | 32MM |
| POLAR PATTERNS | Super-Cardioid  |
| FREQ. RESPONSE | 20Hz-20KHz |
| DYNAMIC RANGE | 135DB MINIMUM |
| MAX. SPL | >135DB (0.5%THD@1000Hz) |
| IMPEDANCE | >150 OHMS |
| SELF-NOISE LEVEL | < 15dB-A |
| SENSITIVITY | -58.0dBV/Pa (0dB=1V/Pa 1KHz) |
| CONNECTOR | 3-PIN XLR |
| Power | Requires 48v Phantom Power |
| Signal-to-Noise Ratio | 79dB |
| Dimensions | 127 x 60mm (mic only) 131 x 106mm (with mount) |
| Weight | 348g (mic only) 450g (with mount) |
