From the brand
Product Description
Specifications:
Dynamic Range: Dynamic mic core
Frequency Response: 40Hz ~16KHz
Pattern: Unidirectional
Sensitivity: -52 ± 3dB
Impedance: 600 Ω ± 30%
Voltage: Positive pressure on the diaphragm produces a positive voltage relative to pin 3 at pin 2.
Output connector: 3P XLP(M)
Weight: 750grams.
Handheld dynamic microphone
Handheld dynamic microphone with rugged grille and optimized frequency response, providing uncompromising vocal reproduction.
Reduce Unwanted Noise
Cardioid polar pattern reduces pickup of unwanted sounds from the sides and rear, improving isolation of desired sound source
Plug and Play
Plug and play,no need to install batteries. It has a ON/OFF switch, press ON when you use it and press OFF when it is not in use.
How to Use?
- For the best gain before feedback and isolation from undesierd background noise, aim the microphone, toward the sound resource and away from undersired sound resource.
- Do not cover any part of the grille with your hand, covering the grille alters the sound and distorts the polar pattern increasing the chance for feedback.
- Some microphones with wire is one, directly to insert a micer or public place machine.
Cautions:
- If the head of the microphone is covered by hand or brought close to the speaker, a howling sound may be generated. To prevent this, first decrease the volume, then place the microphone so that it is not pointed to the speaker and that there is a sufficient distance between the microphone and speaker.
- It is important to keep foreign particles out of the grill and the windscreen because they may alter the frequency response of the microphone. The grill shall be periodically cleaned using warm, soap water, rinsed with plain water and let dry before reacting.
- Due to the high sensitivity of the cartridge, do not drop it from high or apply strong shock to it.
- To maintain the sensitivity and quality of sound reproducing, avoid exposing it to moisture and extreme temperature.
Connecting and Disconnecting the microphone cable:
- Insert the XLR connector into the microphone, if neccessary, rotate the connector to align the key on the connector and the groove in the microphone. Push the connector in to the microphone until it clicks.
- To disconnect the cable and microphone, grasp the connector while depressing the tab. Pull the connector away from the microphone.
deepkumar rokade –
Very good micro phone
Hyden bk-105 microphone is very good for singing. Sound quality is best. I like it & satisfied
Sukumar –
Am happy with the quality
Very happy
lokesh g. –
Super quality
Super
Aman –
Good better and best best best and best .
फैंटास्टिक माइक यदि गायक हो तो ये इन्वेस्टमेंट करना चाहिए, मुझे 12000 वाले से भी बेहतरीन आवाज़ का लगा।
Amazon Customer –
Loved it 😊
Top class 👌👌 worthy
Srikanth –
Excellent Microphone
Sound Quality is good and cleanUse a Sponge or a Wind protection to avoid (plosives)if you know how to use a mic this is easy, angle , distance etc.looks sturdy and doesn’t look cheapPremium quality feel, Connection is good and sturdylooks good and Weight is goodMic holder is a bit not as per expectationsCable length is good 15 ftCable quality is good
Tanu –
Nice product
Best dynamic microphone for Live shows, as well as Studio.Sound is crispy and clear.Vocal also very clean.
D.Babji –
Just OK not good for speech
It is good for singing but not OK for speech.it is not controlled humming