A sturdy TRS jack cable for clean, balanced line connections. The Bespeco BS300S is a 3 m trs jack cable (balanced / stereo) from the Basic series that has a three-pole TRS plug at each end for balanced line connections between keyboards, mixers, audio interfaces and active speakers. Basic is Bespeco’s range of essential cables for everyday connections.
Why customers choose it
- Right length: 3 m gives room to move without a lot of extra cable to coil.
- Oxygen-free copper: OFC conductor with a 0.22 mm² stranded centre core.
- Metal connectors: sturdy metal plugs at both ends.
- Low noise: semi-conductive PVC internal jacket under the shield.
- Made for the job: it has a three-pole TRS plug at each end for balanced line connections between keyboards, mixers, audio interfaces and active speakers.
Who it is for
Home and project studios connecting an audio interface to studio monitors with TRS inputs, keyboard players running into a mixer, and live sound setups linking mixers, processors and active speakers.
Specifications
| Model | BS300S |
|---|---|
| Series | Bespeco Basic series |
| Type | TRS jack cable (balanced / stereo) |
| Connector A | 6.3 mm TRS stereo jack |
| Connector B | 6.3 mm TRS stereo jack |
| Length | 3 m |
| Conductor | 0.22 mm² stranded, OFC |
| Outer diameter | 6 mm |
| Connectors | Metal |
| Colour | Black |
Good to know
- Use it between balanced TRS outputs and inputs (for example interface outputs to monitor inputs) for a quieter signal.
- For a normal guitar to amplifier connection a mono jack cable is the usual choice.
- Plug in with the speaker or amplifier volume down.
FAQ
Which length should I choose?
For a small stage or home setup, 3 m is usually enough. Choose a longer cable when the amplifier, mixer or speaker is far from where you play or sing. This one is 3 m long.
Can I use it for studio monitors?
Yes, when both the interface or mixer output and the monitor input are 6.3 mm TRS jacks.
Ask about this product
Reviews
There are no reviews yet.