Experience professional-grade sound performance with the Digimore D-25A 2.0 Professional Amplifier—a high-power, precision-engineered amplifier designed for demanding live and studio environments. Featuring two channels and a peak output of 2x1400W (Stereo at 2Ω) or 2800W (Bridge at 4Ω), this amplifier ensures crystal-clear and distortion-free audio even at high volumes.
Built with Class H output circuitry, it offers exceptional energy efficiency and dynamic headroom, while maintaining sonic purity across a wide 20Hz–20KHz frequency range. The high damping factor (>800) guarantees tight bass control and accurate sound reproduction.
With selectable input sensitivity (0.775V / 1.2V / 1.4V) and a superior S/N ratio of >100dB, the D-25A delivers clean, noise-free output suitable for professional PA systems, DJ setups, and fixed installations. The intelligent protection system shields against overheating, short circuits, DC faults, and overloads, while four large temperature-controlled cooling fans ensure consistent performance during long operation.
Powered by a 230V AC (50–60Hz) supply, the Digimore D-25A is a robust, reliable amplifier engineered to meet the demands of modern professional audio environments with precision, power, and protection.
For professionals and enthusiasts seeking unparalleled audio performance and reliability, the Digimore D-25 A 2.0 Professional Amplifier sets a new standard in power amplification. Whether you are managing live sound events, running a high-end studio, or installing a sophisticated home audio system, this amplifier delivers the robust power and clear sound quality necessary to elevate any audio experience. The D-25 A 2.0 is engineered to provide exceptional output without compromising precision, ensuring your sound is both powerful and pristine.
One of the primary challenges in professional audio is achieving consistent, distortion-free amplification at high volumes. The Digimore D-25 A 2.0 addresses this with its impressive power ratings: it delivers 650 watts per channel at 8 ohms, 1000 watts per channel at 4 ohms, and an incredible 1400 watts per channel at 2 ohms in stereo mode. When bridged, it can push up to 2800 watts at 4 ohms. This range of output power means the amplifier can handle a wide variety of speakers and venues, from intimate rooms to large concert halls, providing ample headroom to avoid clipping and distortion during demanding performances.
The amplifier’s high input impedance of 20KΩ balanced and 10KΩ unbalanced ensures compatibility with various audio sources, preserving signal integrity and minimizing noise. The H-type output circuitry combined with a damping factor greater than 800 means the amplifier can tightly control speaker motion, resulting in lower distortion and a tighter, more accurate sound. The frequency response is flat and wide, spanning 20 Hz to 20 KHz with minimal deviation (+0/-1 dB), guaranteeing that all audio frequencies are faithfully reproduced without coloration or loss, which is critical for professional applications where sound fidelity is paramount.
Built for reliability under the most demanding conditions, the Digimore D-25 A 2.0 incorporates advanced protection features such as overheat protection, short circuit prevention, DC offset detection, and a soft start mechanism to prolong component life and prevent damage. The four large, high-speed temperature-controlled fans ensure efficient cooling, allowing the amplifier to operate continuously without thermal shutdown. This means you can trust the amplifier to perform consistently during long sessions or high-pressure live events without interruption.
In practical terms, the amplifier’s input sensitivity options of 0.775 V, 1.2 V, and 1.4 V provide flexibility to match various signal levels from different audio equipment, ensuring optimal gain staging and reducing the need for external attenuation or boosting devices. The signal-to-noise ratio exceeding 100 dB ensures exceptionally clean sound reproduction, minimizing background noise and hiss that could detract from audio clarity.
The Digimore D-25 A 2.0 is versatile enough for a wide range of professional audio scenarios. Whether powering large PA speakers for concerts, driving studio monitors in a production environment, or integrating into a high-end home theater system, this amplifier delivers the power and precision needed to meet exacting audio standards. Its robust build and intelligent protection systems make it a dependable choice for users who cannot afford downtime or compromise on sound quality.
Priced at ₹39,000, the Digimore D-25 A 2.0 Professional Amplifier offers exceptional value for audio professionals seeking high power, reliability, and superior sound fidelity. Investing in this amplifier means equipping yourself with a tool designed to enhance every audio experience with clarity and strength. With its advanced features and rugged design, you can be confident that the Digimore D-25 A 2.0 will be a cornerstone of your sound system for years to come.
Reviews
There are no reviews yet.