From the manufacturer

Rode NTG1 Condenser Shotgun Microphone, Black 1

Rode NTG1 Condenser Shotgun Microphone, Black 3

Rode NTG1 Condenser Shotgun Microphone, Black 5

Specifications

Acoustic Principle: Line Gradient
Active Electronics: JFET impedance convertor with bipolar output buffer
Capsule: 0.50″
Polar Pattern: Supercardioid
Address Type: End
Frequency Range: 20Hz – 20kHz
Output Impedance: 50Ω
Maximum SPL: 139dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level: 6.9mV
Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 18dB-A
Power Req.: 48V Phantom Power
Weight: 105.00gm
Dimensions: 219.00mmH x 22.00mmW x 22.00mmD
Output: 3-pin XLR
Warranty: 1 year with free extension to 10 years following registration

Rode NTG1

Shotgun Microphone

The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm./3.7oz.) makes it an ideal boom microphone.

In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications. The RØDE NTG1 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones’ industry leading 10 year warranty (after registration).

Includes mic clip, wind shield and zip case
Broadcast sound quality
Low noise circuitry
Super-cardioid polar pattern
Condenser transducer
Rugged metal construction
10 year extended warranty when you register your microphone

Rode NTG1 Condenser Shotgun Microphone, Black 7

RØDE NTG1 Includes:

-RØDE NTG1 Shotgun Microphone.

-RØDE RM5 Durable Microphone Clip.

-RØDE WSVM Pop Filter/Wind Shield.

-RØDE ZP1 Padded Zip Pouch.

Rode NTG1 Condenser Shotgun Microphone, Black 9

Ideal for Professional Video, Film and Live Stage Applications

The design brief for this microphone was to build a shotgun that could be used in professional video, film and live stage applications where low noise, a wide frequency response and tightly controlled polar patterns are vital.

Rode NTG1 Condenser Shotgun Microphone, Black 11

Supercardioid Polar Pattern

In addition to the native 20Hz-20kHz frequency response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

Rode NTG1 Condenser Shotgun Microphone, Black 13

Weight	0.15 kg
Dimensions	27.3 × 5.7 × 13.3 cm
Special Feature	‎Durable, Low Handling Noise
Compatible Devices	‎Radio, Amplifier, Speaker
Colour	‎Black
Polar Pattern	‎Unidirectional
Impedance	‎25 Ohm
Microphone Form Factor	Shotgun
Item dimensions L x W x H	‎27.3 x 5.7 x 13.3 Centimeters
Number of Batteries	2 AA batteries required.
Material	‎Metal
Signal-to-Noise Ratio	‎80 dB
Number of Channels	‎1
Frequency Range	‎20Hz – 20kHz
Frequency Response	‎20 KHz
Noise Level	‎18 dB
Global Trade Identification Number	‎00698813000456
Product Dimensions	‎27.31 x 5.72 x 13.34 cm; 150 g
Batteries	‎2 AA batteries required.
Item model number	‎NTG1
size	‎NTG1
Colour Screen	‎No
Item Weight	‎150 g, ‎150 Grams
Country of Origin	‎Australia
Imported By	‎Trimac Products Private Limited, D-40, DSIIDC Packaging Complex, Kirti Nagar, Delhi 110015
ASIN	B00093J07C
Date First Available	6 August 2012
Packer	Trimac Products Private Limited, D-40, DSIIDC Packaging Complex, Kirti Nagar, Delhi 110015
Item Dimensions LxWxH	27.3 x 5.7 x 13.3 Centimeters
Net Quantity	1 Count
Included Components	NTG1 (1U), Wind Shield (1U), Microphone clip (1U), Zip Pouch (1U),Microphone Mount (1U), Mount Ring(1U) ,Safety & Warranty Manual (1U)
Generic Name	Condenser
Manufacturer	‎Rode