From the manufacturer
Specifications
- Acoustic Principle: Line Gradient
- Active Electronics: JFET impedance convertor with bipolar output buffer
- Capsule: 0.50″
- Polar Pattern: Supercardioid
- Address Type: End
- Frequency Range: 20Hz – 20kHz
- Output Impedance: 50Ω
- Maximum SPL: 139dB SPL (@ 1kHz, 1% THD into 1KΩ load)
- Maximum Output Level: 6.9mV
- Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted): 18dB-A
- Power Req.: 48V Phantom Power
- Weight: 105.00gm
- Dimensions: 219.00mmH x 22.00mmW x 22.00mmD
- Output: 3-pin XLR
- Warranty: 1 year with free extension to 10 years following registration
Rode NTG1
Shotgun Microphone
The RØDE NTG1 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (105gm./3.7oz.) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional ‘DeadCat’ furry is recommended for outdoor applications. The RØDE NTG1 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones’ industry leading 10 year warranty (after registration).
- Includes mic clip, wind shield and zip case
- Broadcast sound quality
- Low noise circuitry
- Super-cardioid polar pattern
- Condenser transducer
- Rugged metal construction
- 10 year extended warranty when you register your microphone
RØDE NTG1 Includes:
-RØDE NTG1 Shotgun Microphone.
-RØDE RM5 Durable Microphone Clip.
-RØDE WSVM Pop Filter/Wind Shield.
-RØDE ZP1 Padded Zip Pouch.
Ideal for Professional Video, Film and Live Stage Applications
The design brief for this microphone was to build a shotgun that could be used in professional video, film and live stage applications where low noise, a wide frequency response and tightly controlled polar patterns are vital.
Supercardioid Polar Pattern
In addition to the native 20Hz-20kHz frequency response, a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Reviews
There are no reviews yet.