Apogee’s flagship conversion, built around your studio. The Apogee Symphony I/O Mk II SYM2-32X32SE-DANTE is a modular multichannel audio interface with Dante + Pro Tools HD connectivity and 16×16 SE module + 16×16 SE module. Symphony I/O Mk II takes up to 32 channels of analog I/O per chassis, with an intuitive touchscreen – made for recording, mixing and mastering at the highest level.
Why customers choose it
- Exactly the I/O you need: this configuration (SYM2-32X32SE-DANTE) comes with 16×16 SE module + 16×16 SE module: 16 analog in / 16 analog out (DB25) + 2-ch coaxial S/PDIF; 16 analog in / 16 analog out (DB25) + 2-ch coaxial S/PDIF.
- Dante networking: the Dante & Pro Tools HD option card puts Symphony on a Dante audio network over Ethernet, and also links to Pro Tools HD systems. Dante works with Mac and PC.
- Mastering-grade sound: the SE modules are Apogee’s highest-performing Symphony modules: A/D 122 dB dynamic range (A-weighted) and -115 dB THD+N; D/A 126 dB and -119 dB THD+N. The 16×16 SE is the first Apogee product with the ESS 9822pro A/D chip.
- Hands-on control: front-panel touchscreen and control knob give quick access to sample rate, clock, levels and more; 1/4″ headphone output with Apogee Constant Current Drive.
Who it is for
Mixing and mastering engineers, commercial and project studios with outboard gear, post-production and Dolby Atmos rooms, and broadcast facilities that need many line inputs and outputs.
What’s in the box
- Symphony I/O Mk II (16×16 SE module + 16×16 SE module installed)
- 3-pin IEC power cable
- Quick Start Guide
- Warranty booklet
Specifications
| Model / configuration | SYM2-32X32SE-DANTE |
|---|---|
| Platform | Apogee Symphony I/O Mk II |
| Connectivity | Dante + Pro Tools HD |
| I/O modules | 16×16 SE module + 16×16 SE module |
| Analog I/O | 32 in / 32 out |
| A/D (SE) | Dynamic range 122 dB (A-wtd), THD+N -115 dB @ +22 dBu |
| D/A (SE) | Dynamic range 126 dB (A-wtd), THD+N -119 dB @ +21 dBu |
| Max input / output level | +24 dBu (+4 setting) / up to +24 dBu |
| Headphone output | 1 x 1/4″ stereo, front panel, Constant Current Drive |
| Front panel | Touchscreen, control knob, power button |
| Rear panel | 2 module slots, option card slot, word clock I/O, AC power |
| Compatibility | Mac or PC (Dante); Pro Tools HD 9 or later for HD |
| Power | 90-240 VAC, 50-60 Hz, 150 W |
Good to know
- DB25 connections need DB25 snake cables (not included).
- Register with Apogee to download the Symphony Control software and firmware updates.
FAQ
Can I change the modules later?
Yes. Symphony I/O Mk II has two module slots that take any combination of Mk II modules, plus an option card slot for other connectivity.
What is the difference between SE and non-SE modules?
SE modules are Apogee’s top-of-the-line Symphony modules: the 16×16 SE uses the ESS 9822pro A/D chip and an ultra-low distortion output driver.
Reviews
There are no reviews yet.