Shopping Cart (0)
Close
Original price was: ₹35,400.₹31,990Current price is: ₹31,990.
In stock
The sE2200 is the latest version of the award-winning cardioid condenser microphone that put sE Electronics on the map many years ago with its smooth, polished sound for vocals, voiceovers, and numerous instrumental applications. Made famous through use with world-class vocal artists like Amy Winehouse, it revives the spirit of classic studio microphones, and still remains a standard in mic lockers around the world.
The sE2200 eschews integrated circuits for carefully selected, discrete Class A components — a rarity in mics at this price point. State-of-the-art surface-mounted electronic components with extremely tight tolerances deliver expensive-sounding results on any source. With the sE2200, you can expect stunning sound quality with consistent performance and remarkably high sensitivity. It excels in just about every application we’ve used it in here at Sweetwater, and we’re confident that it will do the same for you.
Featuring a custom, handcrafted 1″ gold-sputtered diaphragm, the sE Electronics sE2200 condenser microphone features a fixed cardioid polar pattern. When you close-mic with your sE2200, the cardioid pattern does a great job of capturing what’s in front of it while rejecting bleed from adjacent sources and ambient sound from the rest of the room. This is especially desirable for onstage use, where sound pressure levels can be quite high.
When it comes to capturing dynamic content, not all studio-style condenser mics are created equal. In fact, the same mic that sounds great on your amp stack may be a bit too noisy to use on an acoustic guitar, and your favorite vocal mic may not be able to handle the SPLs typically encountered by drum overheads. Not so with the sE Electronics sE2200 condenser microphone. That’s because the sE2200 is able to withstand up to 145dB (with the 20dB pad engaged), while maintaining a super-low noise floor. It’s just what you need to capture highly dynamic sounds.
Talk about a studio workhorse mic! The sE Electronics sE2200 was built to handle just about any sound you can imagine. Not only is it naturally able to keep up with extremely dynamic sound sources, such as vocals and brass instruments, but it gives you both an 80/160Hz highpass filter and a 10/20dB pre-attenuation pad to further shape its response. Whether you need to cut out low-end rumble or back off the gain to capture a screaming amp stack, the sE Electronics sE2200 gives you the sonic flexibility you need.
| Capsule | Hand-crafted 1" True Condenser |
|---|---|
| Electrical impedance | <50 Ohms |
| Recommended load impedance | >1k Ohms |
| Connectivity | 3-pin male XLR connector |
| Powering | 48V Phantom Power (P48 according to IEC 61938) |
| Polar patterns | Cardioid |
| Frequency range | 20 Hz – 20 kHz |
| Sensitivity | 24 mV / Pa (-32.5 dBV) |
| Max SPL | 125 / 135 / 145 dB (0 / 10 / 20 dB pad) (0.5% THD @ 1kHz) |
| Equivalent noise level | 8 dB |
| Dynamic range | 117 / 127 / 137 dB (0 / 10 / 20 dB attentuation pad) |
| Signal to noise ratio | 86 dB |
| Low-cut filter | 80 / 160 Hz, 6 dB / Oct, switchable |
| Attenuation pad | -10 / -20 dB, switchable |
| Current consumption | 4.2 mA |
| Mic Diameter | 51 mm (2.01 in.) |
| Mic length | 215 mm (8.46 in.) |
| Mic weight | 611 g (21.55 oz.) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.