A DJ cartridge that tracks firmly, cues easily and sounds clean – fitted and ready to go. The Audio-Technica AT-XP7/H DJ Cartridge Kit Black/Clear includes the AT-XP7 dual moving magnet DJ cartridge pre-mounted on the AT-HS6BK headshell. It is made for DJs who want hi-fi sound with dependable tracking.
Why customers choose it
Who it is for
Club and mobile DJs, beginners setting up their first DJ turntable, and vinyl listeners whose turntable takes a detachable 4-pin headshell.
What’s in the box
- AT-XP7 cartridge mounted on AT-HS6BK headshell
- Two 11 mm and two 8 mm installation screws
- Two washers, two nuts
- Non-magnetic screwdriver
Specifications
| Type | Dual moving magnet DJ cartridge on headshell |
|---|---|
| Stylus | 0.3 x 0.7 mil elliptical, bonded round shank |
| Cantilever | Tapered aluminium pipe |
| Frequency response | 20 – 20,000 Hz |
| Output voltage | 6.0 mV (1 kHz, 5 cm/sec) |
| Channel separation | 22 dB at 1 kHz |
| Tracking force | 2.0 – 4.0 g (3.0 g standard) |
| Vertical tracking angle | 20° |
| Load | 47,000 ohms; 100 – 200 pF |
| Mounting | Half-inch, 4-pin headshell |
| Weight | Cartridge 6.2 g; with headshell 15.6 g |
| Replacement stylus | ATN-XP7 |
| Headshell | AT-HS6BK |
Good to know
- Fits tonearms with a universal 1/2″ 4-pin headshell connector.
- Connect to a phono input on your DJ mixer or a phono preamp.
- Set tracking force around 3.0 g and re-balance the tonearm after fitting.
FAQ
Is it good for scratching?
It is built for DJ use with high output and precise tracking from its suspension and damper design.
Which replacement stylus does it use?
The ATN-XP7.
Talk to Suhavi
Reviews
There are no reviews yet.