A detailed, audiophile Shibata cartridge that is already fitted to its headshell – just plug it in and play. The Audio-Technica AT-VM95SH/H Turntable Headshell/Cartridge Combo Kit pairs the AT-VM95SH dual moving magnet cartridge with the AT-HS6BK headshell. It suits vinyl listeners who want a big step up in detail on a turntable with a detachable headshell.
Why customers choose it
Who it is for
Record collectors and hi-fi listeners upgrading from a basic cartridge, and DJ-style or vintage turntable owners whose tonearm takes a universal 4-pin headshell.
What’s in the box
- AT-VM95SH cartridge mounted on AT-HS6BK headshell
- Two 11 mm and two 8 mm installation screws
- Two washers
- Non-magnetic screwdriver
Specifications
| Type | VM stereo dual magnet |
|---|---|
| Stylus | 2.7 x 0.26 mil Shibata, nude square shank |
| Cantilever | Aluminium pipe |
| Frequency response | 20 – 25,000 Hz |
| Output voltage | 3.5 mV (1 kHz, 5 cm/sec) |
| Channel separation | 23 dB at 1 kHz |
| Tracking force | 1.8 – 2.2 g (2.0 g standard) |
| Vertical tracking angle | 23° |
| Load | 47,000 ohms; 100 – 200 pF |
| Mounting | Half-inch, 4-pin headshell |
| Weight | Cartridge 6.1 g; with headshell 15.5 g |
| Replacement stylus | AT-VMN95SH |
| Headshell | AT-HS6BK |
Good to know
- Fits tonearms with a universal 1/2″ headshell connector (4-pin). Turntables with a fixed headshell need the cartridge alone (AT-VM95SH).
- It is a moving magnet cartridge – connect to a phono (MM) input or a turntable with a built-in phono preamp.
- Set tracking force to about 2.0 g and re-balance the tonearm after fitting.
FAQ
Is the cartridge already aligned on the headshell?
It comes pre-mounted on the AT-HS6BK headshell. Check alignment for your tonearm as you would with any new cartridge.
What replacement stylus does it use?
The AT-VMN95SH, and it accepts any other AT-VMN95 stylus too.
Talk to Suhavi
Reviews
There are no reviews yet.