Apogee Symphony I/O MkII Pro Tools HD Interface (Dual 8×8 MP Modules)

Apogee’s flagship conversion, built around your studio. The Apogee Symphony I/O Mk II Pro Tools HD with two Connect 8×8 MP modules is a modular multichannel audio interface with Pro Tools HD connectivity and 2 x Connect 8×8 MP module. Symphony I/O Mk II takes up to 32 channels of analog I/O per chassis, with an intuitive touchscreen – made for recording, mixing and mastering at the highest level.

Why customers choose it

• Exactly the I/O you need: this configuration (Pro Tools HD with two Connect 8×8 MP modules) comes with 2 x Connect 8×8 MP module: Connect 8×8 MP module – 8 mic/line preamps (up to 72 dB gain) + 8 analog out (DB25), plus AES, ADAT and S/PDIF digital I/O.
• Pro Tools HD / HDX ready: the Pro Tools HD option card connects to HD and HDX systems over a Mini DigiLink port; works with any Mac or PC running Pro Tools HD 9 or later.
• Apogee conversion: Apogee’s flagship AD/DA with a fully balanced signal path, fully differential op-amps, cascaded power supplies and the C777 clock circuit.
• Record live bands and drums: 16 high-gain mic preamps (up to 72 dB gain) let you track a full kit or band without an external preamp.
• Hands-on control: front-panel touchscreen and control knob give quick access to settings; 1/4″ headphone output with Apogee Constant Current Drive.

Who it is for

Recording studios that track bands and drums, project studios, scoring stages, live recording rigs and broadcast facilities that need many mic inputs with top-class conversion.

What’s in the box

• Symphony I/O Mk II (2 x Connect 8×8 MP module installed)
• 3-pin IEC power cable
• Quick Start Guide
• Warranty booklet

Specifications

Good to know

• DB25 connections need DB25 snake cables (not included).
• Register with Apogee to download the Symphony Control software and firmware updates.

FAQ

Can I change the modules later?

Yes. Symphony I/O Mk II has two module slots that take any combination of Mk II modules, plus an option card slot for other connectivity.

What is the difference between SE and non-SE modules?

SE (Special Edition) modules are Apogee’s top-of-the-line Symphony modules. The 16×16 SE uses the ESS 9822pro A/D chip and an ultra-low distortion output driver.