Rupert Neve Designs’ RNDI Overview
The Rupert Neve Designs RNDI Active Transformer Direct Interface, designed by the man himself to express the source instrument’s full tone and vibrancy while balancing and isolating the original signal, increases the standard for DIs. The interface, developed via experimenting with novel transformer designs, employs class-A biased discrete FET amplifiers with low-impedance, transformer-balanced outputs to provide constant performance over cable lengths of up to 100′ with minimum loss of high-frequency information.
The device is supplied by industry-standard 48V phantom power via an XLR connector. It generates a very high impedance input of 2 MOhms, ensuring constant performance for a wide range of instruments. The class-A architecture eliminates crossover distortion, which would otherwise introduce musically discordant and higher-order odd harmonics. Instead, the device adds 2nd-order (octave) and 3rd-order (fifth above octave) harmonics to enhance the sound. The system’s discrete architecture eliminates any integrated circuits or digital components that might hurt the sound character.
In instrument mode, the DI provides +21.5 dBU of gain and is also compatible with professional line-level sources like as interfaces, CD players, and drum machines without a pad. This enables the gadget to function as a “preamp” and adjust the tone of a previously recWidth
4″orded piece of music. Simply connect the audio interface’s channel output to the DI’s input and turn on 48V power. “Re-Preamping” allows you to adapt the tone of another preamp to the source and more accurately automate or adjust the preamp’s drive level.
When in speaker mode, the machine can handle the output of a 1000W power amplifier (92 Vrms or 266 Vp-p) to capture the entire tone of the instrument, preamp, EQ, inserts, and amplifier output stages before it reaches the speakers. This helps the engineer to eliminate any bleed in a live scenario, as well as any undesirable tone provided by the speaker cabinet or microphone. When used with current speaker emulation plug-ins, engineers may benefit from the flexibility of digital modeling as well as the non-linear response of an analog amplifier.
Rupert Neve Designs RNDI Direct Box Features :
- Provides a powerful direct tone for basses, guitars, keyboards, and Piezo-equipped instruments.
- Custom transformers provide strong low-end and sweet highs without compromising clarity.
- Flat frequency response between 20Hz and 20KHz.
- Extended responsiveness below 10Hz and over 100KHz.
- Transformers and active circuits ensure total circuit isolation.
- Excellent, consistent performance with extremely low output impedance and phase shift.
- Gold-plated XLR output and 1/4″ input and thru jacks.
- Features include speaker/instrument and ground lift switches, as well as an LED current consumption meter.
- Phantom is powered by a 48V battery.
- Heavy-duty steel chassis for long-lasting use on the road.
Is the Rupert Neve Designs RNDI compatible with both instruments and line-level sources?
Yes, the RNDI works with high-impedance instruments like basses and guitars, as well as professional line-level sources such as audio interfaces, CD players, and drum machines without needing a pad.
What power source does the RNDI require, and how is it powered?
The RNDI is powered exclusively by industry-standard 48 V phantom power supplied through the XLR connector; it does not require batteries or external power adapters.
Can I use the RNDI to capture speaker output signals safely?
Yes, in speaker mode, the RNDI can handle the output from power amplifiers up to 1000 W, allowing you to capture the full tone before the speakers, ideal for re-amping and live sound setups.
What are the physical dimensions and weight of the RNDI direct box?
The unit measures 4″ wide, 6.25″ deep, and 1.5″ high, weighing approximately 1.5 lbs, making it compact and portable for studio or stage use.
What connectors and switches are included on the RNDI for connectivity and control?
It features a 1/4″ input and thru jack, a gold-plated XLR output, plus switches for speaker/instrument mode and ground lift, along with an LED current consumption meter.
How should I care for and maintain the Rupert Neve Designs RNDI to ensure long-term reliability?
The RNDI’s rugged powder-coated steel chassis is built for durability; simply keep it clean and avoid exposure to moisture or extreme temperatures to maintain optimal performance.
Is the Rupert Neve Designs RNDI compatible with both instruments and line-level sources?
Yes, the RNDI works with high-impedance instruments like basses and guitars, as well as professional line-level sources such as audio interfaces, CD players, and drum machines without needing a pad.
What power source does the RNDI require, and how is it powered?
The RNDI is powered exclusively by industry-standard 48 V phantom power supplied through the XLR connector; it does not require batteries or external power adapters.
Can I use the RNDI to capture speaker output signals safely?
Yes, in speaker mode, the RNDI can handle the output from power amplifiers up to 1000 W, allowing you to capture the full tone before the speakers, ideal for re-amping and live sound setups.
What are the physical dimensions and weight of the RNDI direct box?
The unit measures 4″ wide, 6.25″ deep, and 1.5″ high, weighing approximately 1.5 lbs, making it compact and portable for studio or stage use.
What connectors and switches are included on the RNDI for connectivity and control?
It features a 1/4″ input and thru jack, a gold-plated XLR output, plus switches for speaker/instrument mode and ground lift, along with an LED current consumption meter.
How should I care for and maintain the Rupert Neve Designs RNDI to ensure long-term reliability?
The RNDI’s rugged powder-coated steel chassis is built for durability; simply keep it clean and avoid exposure to moisture or extreme temperatures to maintain optimal performance.
Is the Rupert Neve Designs RNDI compatible with both instruments and line-level sources?
Yes, the RNDI works with high-impedance instruments like basses and guitars, as well as professional line-level sources such as audio interfaces, CD players, and drum machines without needing a pad.
What power source does the RNDI require, and how is it powered?
The RNDI is powered exclusively by industry-standard 48 V phantom power supplied through the XLR connector; it does not require batteries or external power adapters.
Can I use the RNDI to capture speaker output signals safely?
Yes, in speaker mode, the RNDI can handle the output from power amplifiers up to 1000 W, allowing you to capture the full tone before the speakers, ideal for re-amping and live sound setups.
What are the physical dimensions and weight of the RNDI direct box?
The unit measures 4″ wide, 6.25″ deep, and 1.5″ high, weighing approximately 1.5 lbs, making it compact and portable for studio or stage use.
What connectors and switches are included on the RNDI for connectivity and control?
It features a 1/4″ input and thru jack, a gold-plated XLR output, plus switches for speaker/instrument mode and ground lift, along with an LED current consumption meter.
How should I care for and maintain the Rupert Neve Designs RNDI to ensure long-term reliability?
The RNDI’s rugged powder-coated steel chassis is built for durability; simply keep it clean and avoid exposure to moisture or extreme temperatures to maintain optimal performance.
Is the Rupert Neve Designs RNDI compatible with both instruments and line-level sources?
Yes, the RNDI works with high-impedance instruments like basses and guitars, as well as professional line-level sources such as audio interfaces, CD players, and drum machines without needing a pad.
What power source does the RNDI require, and how is it powered?
The RNDI is powered exclusively by industry-standard 48 V phantom power supplied through the XLR connector; it does not require batteries or external power adapters.
Can I use the RNDI to capture speaker output signals safely?
Yes, in speaker mode, the RNDI can handle the output from power amplifiers up to 1000 W, allowing you to capture the full tone before the speakers, ideal for re-amping and live sound setups.
What are the physical dimensions and weight of the RNDI direct box?
The unit measures 4″ wide, 6.25″ deep, and 1.5″ high, weighing approximately 1.5 lbs, making it compact and portable for studio or stage use.
What connectors and switches are included on the RNDI for connectivity and control?
It features a 1/4″ input and thru jack, a gold-plated XLR output, plus switches for speaker/instrument mode and ground lift, along with an LED current consumption meter.
How should I care for and maintain the Rupert Neve Designs RNDI to ensure long-term reliability?
The RNDI’s rugged powder-coated steel chassis is built for durability; simply keep it clean and avoid exposure to moisture or extreme temperatures to maintain optimal performance.
Is the Rupert Neve Designs RNDI compatible with both instruments and line-level sources?
Yes, the RNDI works with high-impedance instruments like basses and guitars, as well as professional line-level sources such as audio interfaces, CD players, and drum machines without needing a pad.
What power source does the RNDI require, and how is it powered?
The RNDI is powered exclusively by industry-standard 48 V phantom power supplied through the XLR connector; it does not require batteries or external power adapters.
Can I use the RNDI to capture speaker output signals safely?
Yes, in speaker mode, the RNDI can handle the output from power amplifiers up to 1000 W, allowing you to capture the full tone before the speakers, ideal for re-amping and live sound setups.
What are the physical dimensions and weight of the RNDI direct box?
The unit measures 4″ wide, 6.25″ deep, and 1.5″ high, weighing approximately 1.5 lbs, making it compact and portable for studio or stage use.
What connectors and switches are included on the RNDI for connectivity and control?
It features a 1/4″ input and thru jack, a gold-plated XLR output, plus switches for speaker/instrument mode and ground lift, along with an LED current consumption meter.
How should I care for and maintain the Rupert Neve Designs RNDI to ensure long-term reliability?
The RNDI’s rugged powder-coated steel chassis is built for durability; simply keep it clean and avoid exposure to moisture or extreme temperatures to maintain optimal performance.
Is the Rupert Neve Designs RNDI compatible with both instruments and line-level sources?
Yes, the RNDI works with high-impedance instruments like basses and guitars, as well as professional line-level sources such as audio interfaces, CD players, and drum machines without needing a pad.
What power source does the RNDI require, and how is it powered?
The RNDI is powered exclusively by industry-standard 48 V phantom power supplied through the XLR connector; it does not require batteries or external power adapters.
Can I use the RNDI to capture speaker output signals safely?
Yes, in speaker mode, the RNDI can handle the output from power amplifiers up to 1000 W, allowing you to capture the full tone before the speakers, ideal for re-amping and live sound setups.
What are the physical dimensions and weight of the RNDI direct box?
The unit measures 4″ wide, 6.25″ deep, and 1.5″ high, weighing approximately 1.5 lbs, making it compact and portable for studio or stage use.
What connectors and switches are included on the RNDI for connectivity and control?
It features a 1/4″ input and thru jack, a gold-plated XLR output, plus switches for speaker/instrument mode and ground lift, along with an LED current consumption meter.
How should I care for and maintain the Rupert Neve Designs RNDI to ensure long-term reliability?
The RNDI’s rugged powder-coated steel chassis is built for durability; simply keep it clean and avoid exposure to moisture or extreme temperatures to maintain optimal performance.
Is the Rupert Neve Designs RNDI compatible with both instruments and line-level sources?
Yes, the RNDI works with high-impedance instruments like basses and guitars, as well as professional line-level sources such as audio interfaces, CD players, and drum machines without needing a pad.
What power source does the RNDI require, and how is it powered?
The RNDI is powered exclusively by industry-standard 48 V phantom power supplied through the XLR connector; it does not require batteries or external power adapters.
Can I use the RNDI to capture speaker output signals safely?
Yes, in speaker mode, the RNDI can handle the output from power amplifiers up to 1000 W, allowing you to capture the full tone before the speakers, ideal for re-amping and live sound setups.
What are the physical dimensions and weight of the RNDI direct box?
The unit measures 4″ wide, 6.25″ deep, and 1.5″ high, weighing approximately 1.5 lbs, making it compact and portable for studio or stage use.
What connectors and switches are included on the RNDI for connectivity and control?
It features a 1/4″ input and thru jack, a gold-plated XLR output, plus switches for speaker/instrument mode and ground lift, along with an LED current consumption meter.
How should I care for and maintain the Rupert Neve Designs RNDI to ensure long-term reliability?
The RNDI’s rugged powder-coated steel chassis is built for durability; simply keep it clean and avoid exposure to moisture or extreme temperatures to maintain optimal performance.
Is the Rupert Neve Designs RNDI compatible with both instruments and line-level sources?
Yes, the RNDI works with high-impedance instruments like basses and guitars, as well as professional line-level sources such as audio interfaces, CD players, and drum machines without needing a pad.
What power source does the RNDI require, and how is it powered?
The RNDI is powered exclusively by industry-standard 48 V phantom power supplied through the XLR connector; it does not require batteries or external power adapters.
Can I use the RNDI to capture speaker output signals safely?
Yes, in speaker mode, the RNDI can handle the output from power amplifiers up to 1000 W, allowing you to capture the full tone before the speakers, ideal for re-amping and live sound setups.
What are the physical dimensions and weight of the RNDI direct box?
The unit measures 4″ wide, 6.25″ deep, and 1.5″ high, weighing approximately 1.5 lbs, making it compact and portable for studio or stage use.
What connectors and switches are included on the RNDI for connectivity and control?
It features a 1/4″ input and thru jack, a gold-plated XLR output, plus switches for speaker/instrument mode and ground lift, along with an LED current consumption meter.
How should I care for and maintain the Rupert Neve Designs RNDI to ensure long-term reliability?
The RNDI’s rugged powder-coated steel chassis is built for durability; simply keep it clean and avoid exposure to moisture or extreme temperatures to maintain optimal performance.
Reviews
There are no reviews yet.