Vintage tube compression with modern headroom – adds power, size and depth to a master without getting in the way. The SPL Audio Iron V2 is a stereo tube mastering compressor. It follows the variable-bias idea of radio-era tube compressors and adds SPL 120V technology, so it suits modern mastering work.
Why customers choose it
Who it is for
Mastering engineers and mix engineers who want musical tube compression on the stereo bus, with settings that can be repeated exactly on the next session.
What’s in the box
- 1 x SPL Iron Mastering Compressor
- 1 x Power cord
- 1 x Manual
Specifications
| Type | Stereo / dual-mono tube compressor-limiter |
|---|---|
| Tubes | 2 x Wathen CryoTone 12AX7-WCM + 2 x 12AU7 (matched) |
| Input / output gain | +/-12 dB in 2 dB steps |
| Attack / release | 6 steps each, fast to slow |
| Inputs / outputs | Analog, XLR balanced; XLR side-chain insert |
| Max input / output level | 32.5 dBu |
| Input / output impedance | 20 kOhm / 75 Ohm |
| Frequency range (-3 dB) | 10 Hz – 40 kHz |
| THD (+10 dBu) | 0.002 % |
| Noise (A-weighted) | -98 dBu |
| Mains | 230 V AC 50 Hz / 115 V AC 60 Hz (selectable), max. 60 VA |
| Size (W x H x D) | 482 x 177 x 300 mm |
| Weight | 11 kg |
| Channels | 2 (stereo / dual mono) |
| THD | 0.002% (+10 dBu) |
| Power Supply | Internal linear, 230/115 V AC selectable |
| Transformer | Lundahl |
| Sidechain | XLR insert send/return |
Good to know
- IRON v2 (from October 2022) is marked IRON v2 on the serial sticker and has XLR side-chain send/return sockets.
- If you select the Ext side-chain position with nothing connected (and send/return not bridged), the audio is cut – connect an EQ or a bridge cable first.
- The VU meter can show gain reduction or output level (0 dB or +10 dB).
- Internal linear power supply; SPL says mains voltage changes and fuse swaps are for a qualified technician.
FAQ
Can it run as two mono compressors?
Yes. Without Link the two channels work fully independently. With Link, the right channel controls both and the side-chain is summed.
Does the side-chain EQ change my sound?
No. SPL states the side-chain filters act only on the control signal, not the audio path.


































Reviews
There are no reviews yet.