Voiced by Celestion
Peavey partnered with Celestion speakers to voice their Invective.212 120-watt 2 x 12″ cabinet. They chose to pair a midrange-heavy 60-watt Vintage 30 with the warmer tones of a 60-watt Creamback. When played together, this pairing balances the cut you need for punching through the band with the rounder tones of the Creamback. This is especially beneficial when separately miking each speaker. You’re able to blend the signals of both to taste.
Parallel inputs
There are two ways to run the Invective.212 guitar cabinet. You can plug a single input to achieve the full 120 watts at 16 ohms. Step back and you’ll hear the full glory of the Vintage 30 and Creamback working together. And the Invective.212 120-watt cabinet features parallel inputs. You’re able to run separate signals into each speaker — great for stereo setups as well as wet-dry rigs. In this rig, you’ll gain 60 watts from each speaker at 8 ohms.
Features
- 1 x 12″ Celestion Vintage 30
- 1 x 12″ Celestion Creamback H
- Stereo / Mono input switch
- Dual speaker inputs (parallel mono)
- 16 Ohms mono, 8 Ohms per side stereo
- Packed Weight: 52.92 lb (24 kg)
- Packed Length: 31″ (78.74 cm)
- Packed Width: 21″ (53.34 cm)
- Packed Height: 17″ (43.18 cm)
Q: Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my invective.120 head or other amp heads?
A: Yes — the invective.212 is voiced to pair perfectly with the invective.120 head. It can also be used with other amp heads as long as you match impedance and power: in mono it presents 16 ohms and handles 120 W RMS; in stereo each side is 8 ohms and handles 60 W RMS. Make sure your amp head can safely drive 16Ω (mono) or 8Ω per channel (stereo) and do not exceed the cabinet’s power rating.
Q: How do I wire the cabinet for stereo vs mono and what do the inputs/switch do?
A: Use the Stereo/Mono switch and the two ¼” speaker inputs. For mono: set the switch to Mono and plug a single speaker cable into the mono/left input — the cab becomes a single 16Ω, 120 W RMS load. For stereo: set the switch to Stereo and plug each amp channel into the left and right inputs — each speaker is an 8Ω, 60 W RMS load. If you only plug one input while switched to Stereo you’ll still get sound from one speaker only.
Q: What comes in the box and do I need to buy speaker cable or other accessories?
A: The purchase includes the Peavey invective.212 2 x12 cabinet (with 1 x 12″ Celestion Vintage 30 and 1 x 12″ Celestion Creamback G12 H-75 installed). No speaker cables or amps are included. You’ll need a proper 1/4″ speaker cable (use 14–16 AWG speaker cable with 1/4″ TS speaker plugs) — do not use thin instrument cables. If you plan to chain cabinets, check the amp’s minimum impedance first (parallel connections change total impedance).
Q: What do the two speakers sound like and can I mic them differently for recording or live work?
A: The cabinet pairs a midrange-forward Celestion Vintage 30 with a warmer Celestion Creamback G12 H-75 for punch + roundness. For recording/live use, mic each speaker separately (common choice: an SM57 or similar dynamic on the Vintage 30 for cut, and a ribbon or condenser toward the Creamback for warmth) and blend to taste. For brighter tone mic closer to the cone center; for darker/warm tone move toward the cone edge.
Q: What are the cabinet’s dimensions, weight, and shipping expectations?
A: Packed weight is 52.92 lb (24 kg) with packed dimensions 31″ × 21″ × 17″. It ships fully assembled as a heavy item, so expect standard freight or ground carrier handling — carriers may require a signature or curbside delivery for heavy gear. Allow a little extra delivery time for freight shipments compared with small packages.
Q: How should I care for and transport the invective.212 to keep it roadworthy?
A: The cab uses premium components for road use, but protect it: use a padded cover or flight case for transport, avoid prolonged moisture exposure, tighten grille and speaker hardware periodically, and don’t drop the cab. For repairs or speaker replacement use a qualified tech. Always use proper speaker cables and match impedance/power to prevent damage.
Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my current amp head?
Yes, it’s designed to pair ideally with the invective.120 head but can work with any amp that supports 16 ohms mono or 8 ohms per channel stereo. Just ensure your amp’s power output does not exceed 120 watts RMS in mono or 60 watts RMS per side in stereo to avoid damage.
How do I set up the cabinet for stereo versus mono operation?
Use the Stereo/Mono switch on the back panel. For mono, set the switch to Mono and connect one speaker cable to the mono/left input to get 16 ohms at 120 watts RMS. For stereo, set the switch to Stereo and connect two cables—one to the left input and one to the right input—each speaker runs at 8 ohms and 60 watts RMS.
What exactly comes with the Peavey invective®.212 cabinet and do I need to buy cables separately?
The cabinet includes two premium 12″ speakers: a Celestion Vintage 30 and a Creamback G12 H-75. It does not include speaker cables or an amplifier. You’ll need to purchase 14–16 AWG ¼” TS speaker cables separately; instrument cables are not suitable for this use.
Can I mic the two different speakers separately for recording or live sound?
Absolutely. The Vintage 30 offers midrange punch and pairs well with the warmer Creamback. Miking each speaker separately allows you to blend their distinct tones. A common approach is using a dynamic mic like an SM57 on the Vintage 30 and a ribbon or condenser mic on the Creamback for warmth.
What are the dimensions and weight of the cabinet, and what should I expect for shipping?
The cabinet weighs about 53 lbs (24 kg) and measures 31″ long, 21″ wide, and 17″ high when packed. It ships fully assembled via freight or ground carriers, which may require a signature or curbside delivery due to weight. Expect slightly longer delivery times compared to smaller packages.
How do I care for and transport the invective®.212 to keep it in top condition?
Use a padded cover or flight case for transport to protect the cabinet from bumps and moisture. Regularly check and tighten the grille and speaker hardware. Avoid exposure to prolonged moisture and never use cables with incorrect impedance or power ratings. For repairs, always consult a qualified technician.
Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my current amp head?
Yes, it’s designed to pair ideally with the invective.120 head but can work with any amp that supports 16 ohms mono or 8 ohms per channel stereo. Just ensure your amp’s power output does not exceed 120 watts RMS in mono or 60 watts RMS per side in stereo to avoid damage.
How do I set up the cabinet for stereo versus mono operation?
Use the Stereo/Mono switch on the back panel. For mono, set the switch to Mono and connect one speaker cable to the mono/left input to get 16 ohms at 120 watts RMS. For stereo, set the switch to Stereo and connect two cables—one to the left input and one to the right input—each speaker runs at 8 ohms and 60 watts RMS.
What exactly comes with the Peavey invective®.212 cabinet and do I need to buy cables separately?
The cabinet includes two premium 12″ speakers: a Celestion Vintage 30 and a Creamback G12 H-75. It does not include speaker cables or an amplifier. You’ll need to purchase 14–16 AWG ¼” TS speaker cables separately; instrument cables are not suitable for this use.
Can I mic the two different speakers separately for recording or live sound?
Absolutely. The Vintage 30 offers midrange punch and pairs well with the warmer Creamback. Miking each speaker separately allows you to blend their distinct tones. A common approach is using a dynamic mic like an SM57 on the Vintage 30 and a ribbon or condenser mic on the Creamback for warmth.
What are the dimensions and weight of the cabinet, and what should I expect for shipping?
The cabinet weighs about 53 lbs (24 kg) and measures 31″ long, 21″ wide, and 17″ high when packed. It ships fully assembled via freight or ground carriers, which may require a signature or curbside delivery due to weight. Expect slightly longer delivery times compared to smaller packages.
How do I care for and transport the invective®.212 to keep it in top condition?
Use a padded cover or flight case for transport to protect the cabinet from bumps and moisture. Regularly check and tighten the grille and speaker hardware. Avoid exposure to prolonged moisture and never use cables with incorrect impedance or power ratings. For repairs, always consult a qualified technician.
Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my current amp head?
Yes, it’s designed to pair ideally with the invective.120 head but can work with any amp that supports 16 ohms mono or 8 ohms per channel stereo. Just ensure your amp’s power output does not exceed 120 watts RMS in mono or 60 watts RMS per side in stereo to avoid damage.
How do I set up the cabinet for stereo versus mono operation?
Use the Stereo/Mono switch on the back panel. For mono, set the switch to Mono and connect one speaker cable to the mono/left input to get 16 ohms at 120 watts RMS. For stereo, set the switch to Stereo and connect two cables—one to the left input and one to the right input—each speaker runs at 8 ohms and 60 watts RMS.
What exactly comes with the Peavey invective®.212 cabinet and do I need to buy cables separately?
The cabinet includes two premium 12″ speakers: a Celestion Vintage 30 and a Creamback G12 H-75. It does not include speaker cables or an amplifier. You’ll need to purchase 14–16 AWG ¼” TS speaker cables separately; instrument cables are not suitable for this use.
Can I mic the two different speakers separately for recording or live sound?
Absolutely. The Vintage 30 offers midrange punch and pairs well with the warmer Creamback. Miking each speaker separately allows you to blend their distinct tones. A common approach is using a dynamic mic like an SM57 on the Vintage 30 and a ribbon or condenser mic on the Creamback for warmth.
What are the dimensions and weight of the cabinet, and what should I expect for shipping?
The cabinet weighs about 53 lbs (24 kg) and measures 31″ long, 21″ wide, and 17″ high when packed. It ships fully assembled via freight or ground carriers, which may require a signature or curbside delivery due to weight. Expect slightly longer delivery times compared to smaller packages.
How do I care for and transport the invective®.212 to keep it in top condition?
Use a padded cover or flight case for transport to protect the cabinet from bumps and moisture. Regularly check and tighten the grille and speaker hardware. Avoid exposure to prolonged moisture and never use cables with incorrect impedance or power ratings. For repairs, always consult a qualified technician.
Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my current amp head?
Yes, it’s designed to pair ideally with the invective.120 head but can work with any amp that supports 16 ohms mono or 8 ohms per channel stereo. Just ensure your amp’s power output does not exceed 120 watts RMS in mono or 60 watts RMS per side in stereo to avoid damage.
How do I set up the cabinet for stereo versus mono operation?
Use the Stereo/Mono switch on the back panel. For mono, set the switch to Mono and connect one speaker cable to the mono/left input to get 16 ohms at 120 watts RMS. For stereo, set the switch to Stereo and connect two cables—one to the left input and one to the right input—each speaker runs at 8 ohms and 60 watts RMS.
What exactly comes with the Peavey invective®.212 cabinet and do I need to buy cables separately?
The cabinet includes two premium 12″ speakers: a Celestion Vintage 30 and a Creamback G12 H-75. It does not include speaker cables or an amplifier. You’ll need to purchase 14–16 AWG ¼” TS speaker cables separately; instrument cables are not suitable for this use.
Can I mic the two different speakers separately for recording or live sound?
Absolutely. The Vintage 30 offers midrange punch and pairs well with the warmer Creamback. Miking each speaker separately allows you to blend their distinct tones. A common approach is using a dynamic mic like an SM57 on the Vintage 30 and a ribbon or condenser mic on the Creamback for warmth.
What are the dimensions and weight of the cabinet, and what should I expect for shipping?
The cabinet weighs about 53 lbs (24 kg) and measures 31″ long, 21″ wide, and 17″ high when packed. It ships fully assembled via freight or ground carriers, which may require a signature or curbside delivery due to weight. Expect slightly longer delivery times compared to smaller packages.
How do I care for and transport the invective®.212 to keep it in top condition?
Use a padded cover or flight case for transport to protect the cabinet from bumps and moisture. Regularly check and tighten the grille and speaker hardware. Avoid exposure to prolonged moisture and never use cables with incorrect impedance or power ratings. For repairs, always consult a qualified technician.
Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my current amp head?
Yes, it’s designed to pair ideally with the invective.120 head but can work with any amp that supports 16 ohms mono or 8 ohms per channel stereo. Just ensure your amp’s power output does not exceed 120 watts RMS in mono or 60 watts RMS per side in stereo to avoid damage.
How do I set up the cabinet for stereo versus mono operation?
Use the Stereo/Mono switch on the back panel. For mono, set the switch to Mono and connect one speaker cable to the mono/left input to get 16 ohms at 120 watts RMS. For stereo, set the switch to Stereo and connect two cables—one to the left input and one to the right input—each speaker runs at 8 ohms and 60 watts RMS.
What exactly comes with the Peavey invective®.212 cabinet and do I need to buy cables separately?
The cabinet includes two premium 12″ speakers: a Celestion Vintage 30 and a Creamback G12 H-75. It does not include speaker cables or an amplifier. You’ll need to purchase 14–16 AWG ¼” TS speaker cables separately; instrument cables are not suitable for this use.
Can I mic the two different speakers separately for recording or live sound?
Absolutely. The Vintage 30 offers midrange punch and pairs well with the warmer Creamback. Miking each speaker separately allows you to blend their distinct tones. A common approach is using a dynamic mic like an SM57 on the Vintage 30 and a ribbon or condenser mic on the Creamback for warmth.
What are the dimensions and weight of the cabinet, and what should I expect for shipping?
The cabinet weighs about 53 lbs (24 kg) and measures 31″ long, 21″ wide, and 17″ high when packed. It ships fully assembled via freight or ground carriers, which may require a signature or curbside delivery due to weight. Expect slightly longer delivery times compared to smaller packages.
How do I care for and transport the invective®.212 to keep it in top condition?
Use a padded cover or flight case for transport to protect the cabinet from bumps and moisture. Regularly check and tighten the grille and speaker hardware. Avoid exposure to prolonged moisture and never use cables with incorrect impedance or power ratings. For repairs, always consult a qualified technician.
Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my current amp head?
Yes, it’s designed to pair ideally with the invective.120 head but can work with any amp that supports 16 ohms mono or 8 ohms per channel stereo. Just ensure your amp’s power output does not exceed 120 watts RMS in mono or 60 watts RMS per side in stereo to avoid damage.
How do I set up the cabinet for stereo versus mono operation?
Use the Stereo/Mono switch on the back panel. For mono, set the switch to Mono and connect one speaker cable to the mono/left input to get 16 ohms at 120 watts RMS. For stereo, set the switch to Stereo and connect two cables—one to the left input and one to the right input—each speaker runs at 8 ohms and 60 watts RMS.
What exactly comes with the Peavey invective®.212 cabinet and do I need to buy cables separately?
The cabinet includes two premium 12″ speakers: a Celestion Vintage 30 and a Creamback G12 H-75. It does not include speaker cables or an amplifier. You’ll need to purchase 14–16 AWG ¼” TS speaker cables separately; instrument cables are not suitable for this use.
Can I mic the two different speakers separately for recording or live sound?
Absolutely. The Vintage 30 offers midrange punch and pairs well with the warmer Creamback. Miking each speaker separately allows you to blend their distinct tones. A common approach is using a dynamic mic like an SM57 on the Vintage 30 and a ribbon or condenser mic on the Creamback for warmth.
What are the dimensions and weight of the cabinet, and what should I expect for shipping?
The cabinet weighs about 53 lbs (24 kg) and measures 31″ long, 21″ wide, and 17″ high when packed. It ships fully assembled via freight or ground carriers, which may require a signature or curbside delivery due to weight. Expect slightly longer delivery times compared to smaller packages.
How do I care for and transport the invective®.212 to keep it in top condition?
Use a padded cover or flight case for transport to protect the cabinet from bumps and moisture. Regularly check and tighten the grille and speaker hardware. Avoid exposure to prolonged moisture and never use cables with incorrect impedance or power ratings. For repairs, always consult a qualified technician.
Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my current amp head?
Yes, it’s designed to pair ideally with the invective.120 head but can work with any amp that supports 16 ohms mono or 8 ohms per channel stereo. Just ensure your amp’s power output does not exceed 120 watts RMS in mono or 60 watts RMS per side in stereo to avoid damage.
How do I set up the cabinet for stereo versus mono operation?
Use the Stereo/Mono switch on the back panel. For mono, set the switch to Mono and connect one speaker cable to the mono/left input to get 16 ohms at 120 watts RMS. For stereo, set the switch to Stereo and connect two cables—one to the left input and one to the right input—each speaker runs at 8 ohms and 60 watts RMS.
What exactly comes with the Peavey invective®.212 cabinet and do I need to buy cables separately?
The cabinet includes two premium 12″ speakers: a Celestion Vintage 30 and a Creamback G12 H-75. It does not include speaker cables or an amplifier. You’ll need to purchase 14–16 AWG ¼” TS speaker cables separately; instrument cables are not suitable for this use.
Can I mic the two different speakers separately for recording or live sound?
Absolutely. The Vintage 30 offers midrange punch and pairs well with the warmer Creamback. Miking each speaker separately allows you to blend their distinct tones. A common approach is using a dynamic mic like an SM57 on the Vintage 30 and a ribbon or condenser mic on the Creamback for warmth.
What are the dimensions and weight of the cabinet, and what should I expect for shipping?
The cabinet weighs about 53 lbs (24 kg) and measures 31″ long, 21″ wide, and 17″ high when packed. It ships fully assembled via freight or ground carriers, which may require a signature or curbside delivery due to weight. Expect slightly longer delivery times compared to smaller packages.
How do I care for and transport the invective®.212 to keep it in top condition?
Use a padded cover or flight case for transport to protect the cabinet from bumps and moisture. Regularly check and tighten the grille and speaker hardware. Avoid exposure to prolonged moisture and never use cables with incorrect impedance or power ratings. For repairs, always consult a qualified technician.
Will the Peavey invective®.212 2 x12 Guitar Cabinet work with my current amp head?
Yes, it’s designed to pair ideally with the invective.120 head but can work with any amp that supports 16 ohms mono or 8 ohms per channel stereo. Just ensure your amp’s power output does not exceed 120 watts RMS in mono or 60 watts RMS per side in stereo to avoid damage.
How do I set up the cabinet for stereo versus mono operation?
Use the Stereo/Mono switch on the back panel. For mono, set the switch to Mono and connect one speaker cable to the mono/left input to get 16 ohms at 120 watts RMS. For stereo, set the switch to Stereo and connect two cables—one to the left input and one to the right input—each speaker runs at 8 ohms and 60 watts RMS.
What exactly comes with the Peavey invective®.212 cabinet and do I need to buy cables separately?
The cabinet includes two premium 12″ speakers: a Celestion Vintage 30 and a Creamback G12 H-75. It does not include speaker cables or an amplifier. You’ll need to purchase 14–16 AWG ¼” TS speaker cables separately; instrument cables are not suitable for this use.
Can I mic the two different speakers separately for recording or live sound?
Absolutely. The Vintage 30 offers midrange punch and pairs well with the warmer Creamback. Miking each speaker separately allows you to blend their distinct tones. A common approach is using a dynamic mic like an SM57 on the Vintage 30 and a ribbon or condenser mic on the Creamback for warmth.
What are the dimensions and weight of the cabinet, and what should I expect for shipping?
The cabinet weighs about 53 lbs (24 kg) and measures 31″ long, 21″ wide, and 17″ high when packed. It ships fully assembled via freight or ground carriers, which may require a signature or curbside delivery due to weight. Expect slightly longer delivery times compared to smaller packages.
How do I care for and transport the invective®.212 to keep it in top condition?
Use a padded cover or flight case for transport to protect the cabinet from bumps and moisture. Regularly check and tighten the grille and speaker hardware. Avoid exposure to prolonged moisture and never use cables with incorrect impedance or power ratings. For repairs, always consult a qualified technician.
Reviews
There are no reviews yet.