Send a great miked-cab sound to the PA or your recording – with or without a cabinet. The BluGuitar BluBOX VSC is a professional impulse-response speaker simulation in DI-box form. Thomas Blug picked 16 legendary guitar cabinets, recorded them with the best microphones and recreated them with convolution technology.
Why customers choose it
Who it is for
Guitarists who want consistent direct sound at gigs, home and studio recording guitarists, AMP1 users, and churches or venues with quiet stages.
Specifications
| Type | DI box with IR speaker and mic emulation, pedal format |
|---|---|
| Cabinet Models | 16 |
| Controls | Cab type, mic position, ground lift, high/low input sensitivity |
| Inputs | Line in, speaker in (1/4-inch) |
| Outputs | Line out, speaker through (1/4-inch), transformer-balanced XLR mic out |
| Conversion | 24-bit |
| Latency | About 1 ms |
| Power Supply | 9-12 V DC, 300 mA |
| Dimensions | 120 x 95 x 38 mm |
| Weight | 350 g |
Good to know
- Needs a 9-12 V DC, 300 mA power supply.
- Speaker in + speaker through let you use it between amp and cab, so your cab still plays while the BluBOX feeds the PA.
- The AMP1 Iridium lets you switch off its internal speaker sim to use the BluBOX instead.
- BluGuitar provides a DE/EN manual on its site.
FAQ
Can I use it without a speaker cabinet?
BluGuitar says it works with or without a guitar cab. Check that your amp can safely run without a load before doing so.
Can I connect it straight to a mixer?
Yes. The transformer-balanced XLR mic out goes to the PA or recording desk.























Reviews
There are no reviews yet.