Stereo headphone and line output, PoE supplied

RedNet AM2 is a compact, Power-over-Ethernet (PoE) -supplied stereo analogue output device for any Dante audio-over-IP network. Featuring a powerful headphone amp, capable of driving both high and low impedance headphones, RedNet AM2 is the ideal signal monitoring device to add extra functionality to your audio network.

A pair of rear-panel XLR outputs offers line level signals of up to 24dBu with top panel level control and mute switch, while the front panel 1/4″ headphone output is capable of driving high signal levels perfect for monitoring in high-SPL environments. The bottom of the sturdy aluminium and steel chassis features a threaded mic stand boss allowing RedNet AM2 to be placed in any convenient location whether on a desk or at a performer’s fingertips on a stand. Finally, the IEEE standard PoE input allows a single Ethernet cable to provide power, remote control, clocking and audio data to RedNet AM2.

Brainworx bx_console

The Focusrite Studio Console reborn in your DAW

The Focusrite Studio Console defined countless hits of the 80s and 90s, thanks in large part to its ISA 110 Equaliser and ISA 130 Dynamics Modules. Brainworx’s bx_console Focusrite plug-in brings you stunningly accurate emulations of both in a single plug-in, perfectly capturing the famously warm, open sound of two of the most revered pieces of studio hardware ever made.

Enjoy 3 years of warranty

All Focusrite products are built to the highest standards, and are designed to provide many years of reliable performance.

Specifications in detail

Line level outputs

0 DBFS Reference Output Levels 18 or 24dBu (switchable)
Frequency Response Output 20Hz – 20kHz ±0.05dB
THD+N Output <-100dB (0.001) unweighted, 20Hz – 20kHz;
-1dBFS input
Dynamic Range 120dB A-weighted (typical), 20Hz – 20kHz

Digital performance

Supported Sample Rates 44.1 / 48 / 88.2 / 96 kHz (-4 / -0.1 / 0.1 /
4.167) at 24 bit
Clock Sources Internal or from Dante Network Master
Minimum Latency 1ms

Front panel output connectivity

Headphone Outputs 1 x 1/4″ stereo jack
Line Outputs 2 x Male XLR
PSU (PoE And DC) 1 x PoE (Port 1) Input and 1 x DC 12V Barrel Input Connector
Network Green LED: Indicates device is network master or network
slave, shows valid network lock

Headphone output

0 DBFS Reference Levels Headphones 19dBm
Headphone Frequency Response 20Hz – 20kHz ±0.05dB
Headphone THD N <-100dB (0.001) unweighted, 20Hz – 20kHz;
-1dBFS input
Headphone Dynamic Range 118dB A-weighted (typical), 20Hz – 20kHz
Output Impedance 5O
Headphone Impedance 32O – 600O

Power

Power Over Ethernet (PoE) Complies with IEEE 802.3af class 0 Power-over-
Ethernet standard
DC Power Supply 1 x 12V 1.2A DC Power Supply
Power Consumption PoE: 11.0W – DC: 9.8W
Operating Temperature Operates at up to an ambient temperature of 50
degrees Celcius