Kali Audio WS 6.2 Dual Powered Subwoofer

Kali Audio WS-6.2: Dual 6.5-inch Powered Subwoofer

The Kali Audio WS-6.2 is a studio subwoofer with two 6.5-inch horizontally opposed woofers. It requires less than half the area of similar subwoofers, making it ideal for stereo mix layouts with limited space.

The WS-6.2 is intended to be a companion subwoofer for Kali’s LP-Series and IN-Series monitors, but it may be used with nearly any pair of studio monitors.

Small stature, big sound

The Kali Audio WS-6.2 is slightly bigger than an 8-inch studio monitor, making it perfect for use under a desk or in tight spaces. The horizontally opposed woofers on the WS-6.2 have the same radiating area as a 10-inch woofer but are significantly smaller and more compact.

Furthermore, the woofer design balances off-net vibration, so the sub does not hurry, buzz, or rattle even at high SPL levels.

The Kali Audio WS-6.2 has a maximum SPL of 120 dB, which is enough for most stereo situations and basic multichannel systems. If more SPL is required, a second WS-6.2 may be attached without occupying much room. You might also try utilizing our bigger WS-12 subwoofer.

I/O and Control

The Kali Audio WS-6.2 has balanced inputs for XLR or TRS cables and unbalanced RCA inputs.

You may utilize the 80 Hz crossover to boost your monitors’ low-end response, use LFE mode to give the sub a dedicated LFE channel, or deactivate the crossover and use an external crossover for greater flexibility. The 80 Hz crossover is intended for use with Kali studio monitors, but it is also compatible with monitors from other major manufacturers.

When using the 80 Hz crossover, the XLR outputs will produce a high-passed signal. The WS-6.2 has a footswitch connector to turn off the subwoofer, and the XLR outputs provide a full-range signal to your studio monitors. Footswitches are sold separately and are widely accessible at music stores. If you need assistance ordering a footswitch, please contact Kali Audio’s customer service.

Port Tube

The Kali Audio WS-6.2, like Kali Audio’s full-range speakers, has a front-firing port tube that reduces noise and compression.

Most port tubes have air exiting at varying speeds from various places at the entry, causing loud turbulence. This turbulence can be heard as “chuffing,” an audible air sound produced by the monitor. This sound will increase the loudness intensity while concealing low-end details.

The port tube of WS-6.2 was designed to guarantee that all air exited at the same pace. This increases the speaker’s low-end performance while keeping the bass clean, tight, and free of unwanted noises.

Features:

•  Compact size fits under desks and in most compact passenger vehicles.
•  Low-noise port tubes deliver clean, strong bass without chuffing.
•  Crossover options include 80Hz, LFE, and external crossover. • The polarity flip feature addresses a typical audio issue.
•  RCA inputs support consumer-grade devices.
•  The rear-panel jack lets you use a third-party footswitch to bypass the subwoofer.

For professionals and enthusiasts seeking to elevate their audio experience, the Kali Audio WS 6.2 Dual Powered Subwoofer offers a powerful solution that delivers exceptional low-frequency performance with precision and clarity. Whether you are mixing tracks in a studio, producing music, or enhancing your home audio setup, this subwoofer is designed to provide the deep, impactful bass that brings your sound to life while maintaining accuracy and control.

Many subwoofers can overwhelm a mix with muddy, uncontrolled bass that obscures important details. The Kali Audio WS 6.2 addresses this challenge by combining two 6.5-inch woofers powered by a robust 400-watt RMS amplifier (with a peak power of 1000 watts) inside a front-ported enclosure. This design ensures that low frequencies are reproduced with both power and finesse, enabling you to hear the subtle nuances in your bass lines without distortion. The result is a tighter, more accurate low-end response that allows you to make better mixing decisions and enjoy a more immersive listening experience.

With a frequency range spanning from 31.5 Hz up to 180 kHz (±3 dB), the WS 6.2 captures a wide spectrum of sound, ensuring that the subwoofer integrates seamlessly with your full-range monitors. This extended frequency response means you’ll experience not just deep bass but also a clean, natural transition into midrange frequencies, preventing any gaps or overlaps that can otherwise disrupt your audio clarity. The maximum peak sound pressure level of 120 dB SPL guarantees that this subwoofer can handle high-volume playback without strain, making it suitable for both critical listening environments and larger spaces.

Connectivity options are thoughtfully designed to accommodate professional studio setups and versatile configurations. The subwoofer features two combo XLR-1/4″ inputs, allowing it to connect easily with a variety of audio sources, including mixers, audio interfaces, and monitors. Additionally, it includes a dual RCA stereo input and two XLR outputs for seamless integration with your existing audio chain. The 1/4″ footswitch input provides hands-free control, enabling quick adjustments during live sessions or recording without interrupting your workflow.

Measuring 14.5 inches in height, 12.25 inches in width, and 11 inches in depth, and weighing 16 kilograms, the Kali Audio WS 6.2 is compact enough to fit comfortably into most studio environments without sacrificing performance. Its sturdy construction and professional aesthetics ensure durability and reliability, making it a long-term investment for your audio setup. Despite its powerful output, the subwoofer maintains a manageable footprint, allowing you to position it in the optimal location for accurate bass response.

This subwoofer is ideal for music producers, sound engineers, content creators, and audiophiles who demand precision and power in their low-frequency monitoring. Whether you are fine-tuning bass-heavy genres like hip-hop and electronic music or simply want to experience your favorite tracks with greater depth, the Kali Audio WS 6.2 provides the critical low-end foundation you need. Its ability to reveal bass details that might otherwise go unnoticed transforms both the creative process and your listening enjoyment.

In summary, the Kali Audio WS 6.2 Dual Powered Subwoofer offers a perfect blend of high power, accuracy, and connectivity, making it a standout choice for anyone serious about sound. Available now at a competitive price of ₹58,990 (down from ₹64,700), this subwoofer delivers exceptional value without compromising quality. Invest in the WS 6.2 and experience bass reproduction that is both impactful and precise, empowering your audio work and enriching every listening session with confidence.