Shopping Cart (0)
Close
Original price was: ₹203,300.₹182,990Current price is: ₹182,990.
In stock
Incredibly huge, detailed, and intimate
The Gemini II dual valve microphone is a no-holds-barred piece of microphone history. The dual valve design means pure valve warmth from the 12AX7 input valve, coupled with a 12AU7 valve on the output stage. The result is an incredibly large, detailed, and intimate sound – reminiscent of the classic valve microphones from decades ago, but with a thoroughly modern twist.
The sE Electronics Gemini II Dual Tube Microphone is a high-quality condenser microphone designed for professional recording applications. Here are some key features and details about this microphone:
The Gemini II features a unique dual-tube design with 12AX7 (ECC83) and 12AU7 (ECC82) tubes. These tubes are used in the input and output stages of the microphone, providing warmth and detail to your recordings.
This microphone is engineered to maintain a low noise floor, minimizing unwanted “room noise” that can be common with tube microphones. This ensures clean and pristine audio capture.
The large diaphragm cardioid capsule offers a wide frequency response range of 20 Hz to 20 kHz, making it suitable for capturing a variety of instruments and vocals with great detail.
The cardioid polar pattern is flexible and rejects ambient noise and sound from the sides and rear of the microphone, focusing on the sound source in front of it. This makes it suitable for a range of recording situations.
The Gemini II includes a high-pass filter switch that helps eliminate low-frequency rumble and noise, giving you more control over your recordings.
It also features a -10 dB pad switch, which allows you to attenuate the microphone’s sensitivity when recording loud audio sources, preventing distortion.
The microphone utilizes a 12AX7 tube for warmth and detail at the input stage and a 12AU7 tube for a transformer-less output stage, combining the best of classic tube microphone designs with modern solid-state top-end clarity.
The microphone connects to an external PSU using a 3-pin screw-on terminal for a secure and stable power connection.
It comes with a generous 13-foot (4.2-meter) cable, allowing for flexible placement in your studio setup.
The Gemini II is supplied with a heavy-duty wooden storage case for safekeeping and transport.
Suggested Applications for the sE Electronics Gemini II Dual Tube Microphone:
This microphone is well-suited for capturing vocals with warmth and detail, making it a great choice for singers and voiceover artists.
The wide frequency response and low noise floor also make it suitable for recording percussive instruments like timpani, capturing their rich and dynamic sound accurately.
Overall, the sE Electronics Gemini II is a versatile and high-quality microphone designed for professional recording applications where warmth, detail, and low noise are essential.
| Capsule | Hand-crafted 1 1/4" True Condenser |
|---|---|
| Tube complement | 1x 12AX7 / ECC83, 1x 12AU7 / ECC82 |
| Electrical impedance | 200 Ohms |
| Recommended load impedance | >1k Ohms |
| Connectivity | 3-pin male XLR connector |
| Powering | Provided by power supply unit (included) |
| Polar patterns | Cardioid |
| Frequency range | 20 Hz – 20 kHz |
| Sensitivity | 40 mV / Pa (-28 dBV) |
| Max SPL | 151 / 135 / 145 dB (0 / -10 dB pad) (0.5% THD @ 1kHz) |
| Equivalent noise level | 13 dB |
| Dynamic range | 122 / 132 dB (0 / 10 dB attenuation pad) |
| Signal to noise ratio | 81 dB |
| Low-cut filter | 150 Hz, 6 dB / Oct, switchable |
| Attenuation pad | 10 dB, switchable |
| Mic Diameter | 80 mm (3.15 in.) |
| Mic length | 220 mm (8.66 in.) |
| Mic weight | 1180 g (41.62 oz.) |
| Floor box dimensions | 186 x 157 x 81 mm (7.32 x 6.18 x 3.19 in.) |
| Floor box weight | 1970 g (69.49 oz.) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.