SoundID Reference for Speakers & Headphones with Measurement Microphone SW5SX

In less than 20 minutes you can calibrate your existing studio speakers with a measurement microphone (buy from us or use yours) and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets. With an applied calibration profile the software sets the frequency response target to be completely flat across all audible frequencies so you can trust that every mix will translate. You can also now make custom adjustments to the target curve in real time with the new custom target feature.
With accurate studio reference sound you can seamlessly switch between speakers, headphones, and rooms. Finally, mix with confidence and make music that sounds great everywhere.

Key Features
● Speaker calibration: save as many profiles as needed
● Headphone calibration profiles for 280+ supported models
● Custom target: target curve adjustments in real time
● Translation Check: simulating 20+ different devices and device types for accurate mix translation results everywhere without leaving the workstation
● 3 filter modes: Zero Latency, Mixed and Linear Phase
● Additional DSP processing controls: Mono, Dry/Wet and Safe Headroom
● MIDI mapping in the SoundID Reference app for various controls
● User Presets in the SoundID Reference app for switching quickly between
predefined output device/channel pair combinations

Achieving precise and accurate audio monitoring is essential for professionals and enthusiasts who demand the highest fidelity from their sound systems. Whether you are mixing music, producing podcasts, or mastering audio tracks, the Sound ID Reference for Speakers & Headphones with Measurement Microphone SW5 SX offers a comprehensive solution to eliminate guesswork and ensure your audio playback is true-to-source. This system is designed to calibrate your speakers and headphones with scientific accuracy, delivering an unprecedented level of confidence in your listening environment.

The core challenge for audio professionals lies in the inconsistencies of playback systems and room acoustics that distort sound perception. The Sound ID Reference addresses this problem by providing a calibrated measurement microphone and sophisticated software that work together to identify and correct these distortions. By tailoring the audio output to the unique characteristics of your speakers, headphones, and room, it guarantees a flat, neutral response that reveals every detail in your mix. This means you can trust what you hear, resulting in mixes that translate perfectly across all playback systems.

At the heart of this product is a pre-polarized electret-condenser microphone with an omnidirectional polar pattern, specifically designed for accurate room and speaker measurement. Its frequency response spans the full audible range from 20 Hz to 20 kHz, ensuring no part of the sound spectrum is overlooked. With a sensitivity of -37 dB/Pa and an impressive dynamic range of 106 dB, this microphone captures even subtle acoustic nuances with high precision. The low self-noise level of 24 dB and signal-to-noise ratio of 70 dB enable clean and reliable measurements that form the basis for precise calibration.

To utilize the system, your setup must include a compatible Mac running macOS 10.12 or later, or a PC with 64-bit Windows 8 or newer. The software requires a stereo speaker system configured as 2.0 or 2.1 and an audio interface capable of providing +48 V Phantom Power with a 44.1 kHz sample rate. During measurement, the audio hardware setup should consist of a single external device to ensure accuracy. The microphone connects via an XLR cable, ensuring professional-grade signal integrity. Note that the system supports Sonarworks calibrated headphones or Sonarworks-supported models, which are sold separately.

This product is ideal for sound engineers, producers, and serious audiophiles who demand the highest level of accuracy in their monitoring environment. It is perfect for use in home studios, professional mixing suites, and post-production facilities where precision is paramount. By applying the calibration curves generated by the software, you can confidently make critical mixing decisions, knowing that your playback environment is delivering a truthful representation of the audio material.

In summary, the Sound ID Reference for Speakers & Headphones with Measurement Microphone SW5 SX is an indispensable tool for anyone serious about sound accuracy. Priced competitively at ₹34,323 on sale from ₹36,130, it offers exceptional value for a system that dramatically improves your monitoring experience. Invest in this solution to unlock the full potential of your audio equipment, avoid costly mixing errors, and elevate your productions to professional standards with confidence.