Shopping Cart (0)
Close
₹154,030
In stock
In stock
The SPL MTC Mk2 takes everything that made its predecessor a hit, and takes it to a higher level. This monitor controller boasts a solid-feeling Volume knob, plus three monitoring modes, Mono and Dim switches, individual Mute switches for studio monitors and headphones, and mid-side monitoring. The MTC Mk2 contains enough I/O for three pairs of studio monitors, a sub, and four stereo input sources. A dedicated meter output and studio monitor level calibration ensure top-shelf sound in every application. The MTC Mk2’s excellent talkback system includes a built-in microphone, plus a dedicated Level control, automatic cue mix attenuation, and hands-free control via a footswitch. You also get a top-of-the-line headphone amplifier with two headphone output jacks and dedicated level controls for each output. To top it off, the MTC Mk2 includes SPL’s vaunted Phonitor Matrix technology for speaker-like performance when listening on headphones. The MTC Mk2 includes +/-18V internal operating voltage, through-hole technology on all important components, and a high-quality switched-mode power supply.
The MTC Mk2 gives you full control over your monitoring chain. A solid-feeling aluminum knob provides easy, intuitive volume adjustment. Three monitoring modes ensure maximum flexibility. Stereo monitoring — complete with a mono compatibility check — is the standard. You can monitor a reverse-phase version of your mix via the Ø switch. You can also audition a reverse stereo version of your mix via the LR Swap switch — a must-have for film work. What’s more, by using the Mono and Ø switches in concert you can monitor the mid and side portions of your mix individually. The MTC Mk2 also includes a Dim switch, plus separate Mute switches for your speakers and headphones.
When we took the SPL MTC Mk2 for a test drive here at Sweetwater, we were impressed with its robust I/O. You get enough outputs for three pairs of stereo speakers, along with a mono output for a subwoofer. Each pair of outputs has a dedicated on/off switch, and there’s a separate Sub switch as well. And since the subwoofer output sends a full-range signal, you can also use it to connect a single mono monitor speaker. You get four stereo inputs, each with a dedicated on/off switch. Inputs A–C features balanced TRS jacks, while input D includes an RCA input for consumer playback devices. You can also use input C as a cue mix input. A dedicated meter output and studio monitor level calibration is also included.
The MTC Mk2 boasts an impressive talkback system, complete with a built-in condenser mic. The built-in microphone features a top-shelf design derived from the technology employed by measurement microphones. The talkback system is activated via a Talk button, which lights up when pressed. You also get a dedicated Level control for the talkback signal. The talkback signal is routed to the Talk Out jack on the MTC Mk2’s rear panel, where it can either be fed into a speaker in the recording room or sent back to your DAW. Engaging the talkback system automatically attenuates the artist’s cue mix, and the attenuation is fully adjustable. To top it off, a Footswitch input enables hands-free use of the MTC Mk2’s talkback system.
If you demand top-quality sound from your headphones, you’re in luck. The SPL MTC Mk2’s headphone amplifier boasts a push-pull, Class AB design, which yields higher gain and higher output voltage than Class A amplifiers. The amplifier’s output stage transistors are thermally coupled for consistent operation and a stable sound image. Beyond that, the MTC Mk2’s buffered power supply facilitates great sound, even with low-impedance headphones. The MTC Mk2 includes two headphone output jacks, each with a dedicated level control.
Good sound always starts with the power supply. The MTC Mk2 has a high-quality switched-mode power supply that automatically adapts to all common voltages between 90 V AC and 250 V AC with 50 Hz or 60 Hz.
Solid-feeling aluminum knob provides easy, intuitive volume adjustment
3 monitoring modes: Stereo, Reverse Phase, and LR Swap
Mono switch enables you to check your mix’s mono compatibility
Enables you to monitor the mid and side portions of your mix individually
Dim switch, plus separate Mute switches for your speakers and headphones
Enough outputs for 3 pairs of stereo speakers, along with a mono output for a subwoofer
Dedicated on/off switch for each pair of outputs, plus a separate Sub switch
Subwoofer output can be used to connect a single full-range mono monitor speaker
4 stereo inputs; includes both balanced and unbalanced connectors
Dedicated meter output and studio monitor level calibration
Excellent talkback system with a built-in condenser mic
Dedicated Level control for the talkback signal
Engaging the talkback system automatically attenuates the artist’s cue mix
Footswitch input enables hands-free use of the talkback system
High-quality push-pull, Class AB headphone amplifier with thermally coupled output stage transistors
2 headphone output jacks, each with a dedicated level control
Phonitor Matrix re-creates speaker-like spatial effects when listening on headphones
+/-18V internal operating voltage accommodates levels up to +22.5dB with added headroom
Employs through-hole technology for all important components
High-quality switched-mode power supply
| Type: | Monitor/Talkback Controller |
|---|---|
| Input Channels: | 4 x stereo sources |
| Output Channels: | 3 x stereo monitors, 1 x Sub |
| Analog Inputs: | 6 x 1/4", 1 x Dual Stetero RCA |
| Analog Outputs: | 5 x XLR, 6 x 1/4" |
| Headphones: | 2 x 1/4" TRS |
| Other I/O: | 1 x 1/4" (Footswitch) |
| Talkback: | Yes |
| Form Factor: | Desktop |
| Power Supply: | Standard IEC AC cable |
| Height: | 3.58" |
| Width: | 10.71" |
| Depth: | 10.83" |
| Weight: | 6.61 lbs |
